FUTURELIGHT PLB-280 Moving-Head Spot/Beam

PLB-280 прожектор с полным движением Beam / Spot, 13 цветов, 14 фикс гобо, 9 вращ гобо, 8 гранная и 6 гранная линейная призма, фрост, угол луча 2° - 10° Beam, 5.5° - 23° Spot, фокусировка, диммер, строб, электронный баласт. DMX512. В комплекте с лампой Osram Sirius HRI 280W.

Возможности:

Quick-change artist: Spot, beam and wash-light combined in one high-power Moving Head

• Equipped with an Osram Sirius HRI 280 W discharge lamp
• Upgrade via optional wireless receiver module for WDMX operation (Wireless Solution - made in Sweden)
• Supports RDM (Remote Device Management)
• High PAN/TILT speed
• 14, 16, 20 or 23 DMX channels selectable
• Spot, beam and due to the use of the frost filter also wash light in one device
• Color wheel with 13 different dichroic color filters plus white
• Rainbow effect with adjustable speed in both directions
• Effect wheel with rotating 6-facet linear prism, 8-facet prism and frost filter
• The prism rotate in both directions and at different speeds
• Gobo wheel 1 with 9 rotating gobos plus open
• All rotating gobos can be interchanged
• Slot-in gobo system for exchanging gobos without tools
• Gobo wheel 2 with 14 static gobos plus open
• With gobo shake function
• Strobe effect with adjustable speed
• Random strobe effect
• Motorized focus
• Autofocus
• Motorized zoom with 2 - 10° beam angle (Beam mode) and 5.5 - 23° beam angle (Spot mode)
• Dimmer
• PAN angle switchable between 540° and 630°
• Exact positioning via 16 bit PAN/TILT movement resolution
• Automatic position correction,
• Switch-mode power supply, automatic power supply adaption between 100 and 240 Volts without power selector
• ESDC function (Easy Service Data Check) with battery-buffered control board for operation time readouts etc. (the Li-Ion battery 3.7V, AAA, 10440 is not included)
• Control board with graphic LCD display for adjusting the DMX-starting address, PAN/TILT reverse, reset, lamp on/off, operating hours
• DMX-controlled operation or stand-alone operation with master/slave function
• Number of scenes in Program Run can be changed individually
• The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
• Software upload by optional accessory via DMX link
• Sound-controlled via built-in microphone
• With Osram Sirius HRI 280 W lamp
• Power connection via Neutrik PowerCon jack and included power cable
• DMX-control via any standard DMX-controller

Основные характеристики: